When using AirPod headphones, it can be quite irritating when you realize your AirPod case is not charging and you depend so much on your AirPod case. In addition to listening to music, receiving calls, or simply avoiding being worlds away from everyone else, it is necessary to charge the AirPods and be ready for use.
In the following article, the causes of an AirPod case not charging will be analyzed, and practical solutions to fix it will be explained. Additionally, helpful guidelines about how to extend the life of the case and avoid similar problems will be included. Knowing what may cause and what may solve the charging problem will help you freely use AirPods without interruptions and charge the case when necessary.
So, if you have been asking yourself, “Why is my AirPod case not charging?” then continue to read to find out the causes and how they can be fixed to bring back efficiency to your AirPod case.
Common Reasons Why Your AirPod Case is Not Charging
Realizing the possible causes of the failure of your AirPod case to charge can ensure that you solve the problem very efficiently. Here are some common causes: Here are some common causes:
Faulty Charging Cable
Charging issues are quite common, and, in most instances, the issue could be a result of the charging cable used. Now and then the cables can become worn out or damaged, and every time that one wants to use them, there is little tend or they don’t connect at all. Based on observations, check cables for cable damage or corrosion from the connectors and the outer layer.
Dirty Charging Port
This is one of the many reasons why dust, lint, and other debris collect in the charging port of your AirPod case and hinder the contact established between the case and the charging cable. This may impair the case of an inability to charge properly. Cleaning the charging port oftentimes can create better contact.
Software Issues
At other times, it can be a result of software hitches affecting the charging process. Sometimes the firmware version on the device or software bugs may contribute to the problem in charging. Updating the firmware of AirPods and their cases can solve these problems; make sure you have the current version.
Battery Degradation
It is crucial to realize that any rechargeable battery, including the one located in the AirPods charging case, degrades over time. The capacity of the battery contained in your case may have degraded over time; hence, it is not able to charge for such a long duration again. In this case, one may have to replace the battery of the smart device in question.
Power Source Problems
Another factor could be the power source you are using to charge your AirPod case, since they could also be different. Sometimes, depending on the power that the outlet, power bank, or USB port provides, your AirPod case may not charge properly. Other than that, it is advisable to check out another power source to eliminate this matter.
Faulty Case
Rarely, the problem is not with the AirPod but with the carrying case that houses the podcast. They also suffer from problems regarding charging, and internal components that can also fail. This could very well be the case, and it probably means that calling Apple Support for a diagnostic or a replacement might be inevitable.
Troubleshooting Steps for an AirPod Case Not Charging
If your AirPod case is not charging, follow these troubleshooting steps to identify and resolve the issue.
Step 1: Check and Clean the Charging Port
- Inspect the Port: Turn on the flashlight and look for anything that may be blocking the charging port or any dirt in the port.
- Clean the Port: To avoid damaging any circuits, wipe the port with a duster, a soft-bristle brush, a toothpick or a spray of compressed air, whichever is applicable to gently clean the port of any particles.
Step 2: Inspect the Charging Cable and Power Source
- Check the Cable: Some signs may be seen that may indicate that they need to be replaced, for instance, frayed or bent connectors.
- Test with Another Cable: Switch the charging cable to check if the problem remains.
- Change the Power Source: You should first attempt to change the port or outlet through which the charging cable is connected to eliminate the possibility of power source problems.
Step 3: Reset the AirPods and Charging Case
- Open the Case Lid: Place the AirPods back into the case.
- Press and Hold the Button: Press the setup button on the back of the case and do this for 15 seconds until the status light flashes Amber and then White.
- Reconnect the AirPods: Settings-Bluetooth, have AirPods listed, remove each, then pair again.
Step 4: Update Firmware/Software
- Check for Updates: Make sure that the device is updated to the newest iOS at the moment or the newest macOS in case you use a Mac device.
- Automatic Firmware Updates: The AirPods update its firmware via the Apple device that is paired with it. Ensure that your AirPods are connected to the device and are close to it to enable the updates to occur.
Step 5: Monitor Battery Health
- Check Battery Levels: Command your device to tell you the battery condition of your AirPods as well as the case.
- Assess Battery Health: If the case is considerably old and can hardly hold a charge, it might require a new battery.
Step 6: Consider Professional Help
- Apple Support: If the described above steps do not help, it is recommended to turn to Apple Support.
- Diagnostic Service: It is advised to report to an Apple store or any other authorized service centre to get the problem diagnosed, fixed, or replaced, as the case may be.
How to Clean Your AirPod Case and Charging Port?
To guarantee that your AirPod case and charging port make a good connection and charge optimally, you should clean them. Here is a step-by-step procedure detailing how you can safely and effectively clean your AirPod case and charging port.
Tools Needed for Cleaning
- Soft, dry, lint-free cloth
- Soft follicle-containing brush such as a toothbrush.
- Wooden or plastic toothpick
- Compressed air canister
- Isopropyl alcohol (optional)
Cleaning the AirPod Case
Step 1: Exterior Cleaning
- Wipe Down the Case: For cleaning the outer surface of the case that houses the AirPods, you should use a soft, lint-free cloth and dry it to wipe the case and get rid of dust and fingerprints.
- Dampen if Necessary: Sometimes you will find some really hard stains, For this, simply wipe the surface of the cloth with a few drops of water or isopropanol. Make sure the cloth is not wet so that moisture enters the case of the instrument.
- Dry Thoroughly: Ensure that the affected case is as dry as possible before moving on.
Step 2: Interior Cleaning
- Remove Debris: Take a soft-haired brush, to clean any dirt or debris that might still be present in the interior of the case.
- Clean the Lid: Clean around the outside edges, especially the lid area; this is where most of the dirt tends to collect.
- Avoid Liquids: Liquids should not be taken inside the case, mainly because liquids could harm the electronics in the case.
Cleaning the Charging Port
Use a flashlight and try to see through the charging port to see if there is dirt or debris stuck inside.
Step 2: Remove Debris
- If there is any dust or debris, then you should take a can of compressed air and blow it through the charging port. First of all, one should keep the press can vertical and apply pressure only several times.
- Make sure that you gently use the wooden or plastic toothpick to clean up the charging port surface. able to prevent the hostile modification of the port.
Battery Health and Lifespan in AirPod Cases
The important thing about battery health in the case of AirPods is to make sure it is kept in its optimum state for as long as possible. Below is the ultimate guide to help you comprehend the battery health and longevity of AirPod cases.
What is Battery Health?
Battery health, or battery capacity, is the state of the rechargeable battery at any given time and its capacity to perform to the maximum of its ability. Regarding the AirPod cases, battery health defines how well a case is capable of holding its charge and for how long it can be fully useful in charging AirPods.
Factors Affecting Battery Health
Usage Patterns
- Frequent Charging: Cycling means charging and discharging a battery and if this is done over and over again, the battery will be used up more often.
- Deep Discharges: Frequent depletion of the battery right down to the indicator is also not good for the battery’s health.
Environmental Conditions
- Temperature: Too much heat or too much cold can also be a problem in battery health and how it performs.
- Humidity: High humidity also causes the formation of rust since water molecules are attracted to the metals of the battery, thus making the batteries moist and reducing their performance.
Age
- Natural Degradation: As for any rechargeable batteries, they all have a finite charge-discharge cycle and degrade chemically with time.
Signs of Battery Degradation
- The case itself does not hold a charge as heavily as before.
- The charging time for the case is comparatively longer so that you can use it later.
- The case sometimes does not charge the AirPods properly.
How to Monitor Battery Health
Check Battery Levels
- On iOS devices, locate the lightning port and open the case close to your iPhone or iPad to check the battery status of the case and the AirPods on the case’s screen.
- Battery Widget: A battery widget is also available, so you can put it on your iOS home screen to always keep an eye on it.
Third-Party Apps
- Other third-party apps can even give more exhaustive information on the battery of the AirPods and its case
Maximizing Battery Lifespan
Proper Charging Practices
- Avoid Overcharging: Remove the case once it has been charged to its capacity.
- Use Official Chargers: Charge with an Apple-recommended cable and adapter or any other Apple-certified cable and adapter.
Environmental Care
- Temperature Control: If you have kept your AirPod case within the recommended temperature range, ideally less than 35 degrees Celsius, then it is useful.
- Dry Conditions: Always ensure that your AirPod case is kept and used in dry areas only to prevent it from being damaged by moisture.
Regular Maintenance
- It is recommended to clean the charging ports and the case to increase the efficiency of the charging process.
- It is always best to make sure that both your AirPods and the case have the correct firmware that’s really up to par.
When to Consider Replacing the Battery
- If, for some reason, the battery degenerates and decreases usability, one should replace it.
- Bring your iPhone, iPad, or iPod to an Apple Store or an Apple-authorized service provider to upgrade or get a battery checked.
Preventive Measures to Avoid AirPod Case Charging Issues
The following preventative measures help preserve the function of your AirPod case and in preventing charging problems. Here are some steps to ensure your AirPod case stays in good condition: Here are some steps to ensure your AirPod case stays in good condition:
Regular Cleaning
Clean the Charging Port
- Inspect Regularly: Whether it is charging or not, it is always wise to check the charging port for dust and other particles.
- Use Compressed Air: Blow out particles with a can of compressed air if there are any.
- Gentle Cleaning: Gently polish the port using a soft hair brush or a toothpick because, at this stage, hard brushing might cause damage to the port surface.
Clean the Exterior and Interior
- To clean the exterior and interior of the case, one should then use a very soft cloth that is also dry.
- Avoid using a lot of liquid; for stains that are hard to remove, one can use a moderately wet cloth.
- For effective use of the case, make sure that it is thoroughly dry.
Proper Storage
Store in a Safe Place
- Wherever your AirPod case is, avoid placing it in areas that are dusty or likely to get dirty easily.
- To ensure that the item does not fall onto hard surfaces, thereby inflicting damage on the small screen, it should be stored safely in a suitable receptacle.
Use a Protective Case
- Invest in a Case Cover: If your AirPod case is made of a bash-resisting material, it will protect the AirPods and the case from scratching or impact.
- Keep it Clean, The protective case of the AirPods also needs to be regularly be cleaned so that it doesn’t deposit dust on the original AirPod case.
- These fake chargers are usually of low quality; hence they may harm mobile devices or not charge them in the right manner.
- Monitor Charging Time: Do not let the case remain plugged in for longer hours than required it is recommended to unplug it when not in use.
Regular Software Updates
Keep Firmware Updated
- Check for Updates: Always ensure that you are downloading firmware updates because they might contain enhancements and bug patches for the AirPods.
- Automatic Updates: Your AirPods should be paired with an Apple device to get firmware updates automatically or manually through the apply update feature.
FAQ
1. My AirPod case is not charging even when it is connected to a power source. Why is this so?
The cause may be many, such as a poor charging cable, clogged charging port, software problem or battery problem. Clenishing the charging port area should be attempted, as should using a different cable or resetting the AirPods.
2. How do I reset my AirPod case if it’s not charging?
To reset your AirPod case, open the lid and keep the AirPods inside. Press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber and then white. Reconnect your AirPods to your device.
3. Can I replace the battery in my AirPod case if it’s no longer holding a charge?
While Apple does not provide a battery replacement service for AirPod cases, you can purchase a new case from Apple or an authorized retailer if the battery health has significantly degraded.